MG-5 tömör bronz esztergált perselyek
MG-5 tömör bronz esztergált perselyek
Marginal Bearing mg-5 tömör bronz esztergált perselyek Az önkenő csapágyak és perselyek speciális gyártója, a Marginal Bearing, amelyet 2010-ben alapítottak, új önkenő csapágyanyagok fejlesztésével és gyártásával foglalkozik.
◆ Introduction
Machined cast bronze bearings offer technically and economically favorable bearings solutions. It is with high load capability, low weight and good corrosion resistance. MG can offer different types of bronze alloys according to the required life time, service etc. The tolerance is much tighter than wrapped bronze bushes.
◆ Lubricated groove
◆ Technical Data
| Technical Data | ||||||
| MG-5 | MG-5S1 | MG-5S2 | MG-5S3 | MG-5S4 | MG-5S5 | |
| Material designation | CuZn25Al6Mn4Fe3 | CuSn5Pb5Zn5 | CuAl10Ni5Fe5 | CuSn12 | CuSn10Pb10 | CuZn25Al6Mn4Fe3 |
| Density | 8 | 8.9 | 7.8 | 8.9 | 8.9 | 8 |
| Yield Strength N/mm2 | ＞450 | ＞90 | ＞260 | ＞150 | ＞100 | ＞450 |
| Tensile Strength N/mm2 | ＞750 | ＞200 | ＞600 | ＞260 | ＞210 | ＞800 |
| Elongation % | ＞12 | ＞15 | ＞10 | ＞8 | ＞8 | ＞8 |
| Hardness HB | ＞210 | ＞70 | ＞150 | ＞95 | ＞75 | ＞250 |
◆ Standard Size：
Cylindrical Bearing , Flange Bearing, Thrust washer , Plate.
Non-Standard Size：
Cylindrical Bearing , Flange Bearing, Thrust washer , Plate.
sajnálom, most nincs információ!
Machined cast bronze bearings offer technically and economically favorable bearings solutions. It is with high load capability, low weight and good corrosion resistance. MG can offer different types of bronze alloys according to the required life time, service etc. The tolerance is much tighter than wrapped bronze bushes.
